Network setup

[Note]

Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview).

Option

Description

TCP/IP (IPv4)

Selects the appropriate protocol and configure parameters to use the network environment.

[Note]

There are lots of parameters to be set. If you are not sure, leave as is, or consult the network administrator.

TCP/IP (IPv6)

Selects this option to use the network environment through IPv6 (see IPv6 configuration).

Ethernet Speed

Configure the network transmission speed.

Wireless

Selects this option to use the wireless network.

Clear Setting

Reverts the network settings to the default values. (Reboot required.)

Network Conf.

This list shows information on your machine’s network connection and configuration.

Protocol Mgr.

You can activate or deactivate the following protocols.

  • Net. Activate: You can set whether to use Ethernet on or off.

    [Note]

    Turn the power off and on after you change this option.

  • Http Activate: You can sets whether to use SyncThru™ Web Service or not.

    [Note]

    Turn the power off and on after you change this option.

  • WINS:  You can configure the WINS server. WINS(Windows Internet Name Service) is used in the Windows operating system.

    [Note]

    Turn the power off and on after you change this option.

Protocol Mgr. (continued.)

  • SNMP V1/V2: You have to enable this option to use SNMP V1/V2 protocol. Administrator’s can use SNMP to monitor and manage machines on the network.

  • UPnP(SSDP): You have to enable this option to use UPnP(SSDP) protocol.

    [Note]

    Turn the power off and on after you change this option.

  • MDNS: You have to enable this option to use MDNS (Multicast Domain Name System) protocol.

  • SetIP: You have to enable this option to use SetIP protocol.

  • SLP: You can configure SLP (Service Location Protocol) settings. This protocol allows host applications to find services in a local area network without prior configuration.

    [Note]

    Turn the power off and on after you change this option.